Plywood parts router Reception Desk Installation

Our Production Process

Every project sent to NorthWoods for CNC machining undergoes the same rigorous quality control process – from design through delivery.

Job Flow For
Assembled Cabinets and Countertops

  1. Basic design concept and budget are established and agreed upon.
  2. Drawings are completed and a formal proposal is created.
  3. Upon acceptance of the proposal, a 50% deposit is due.
  4. CNC programming is completed.
  5. Materials are ordered.
  6. Any custom panels are laid up in the hot press.
  7. Parts are machined on Thermwood CNC Router.
  8. All parts are labeled as they come off the machine.
  9. Edge banding is added as needed.
  10. Job is fabricated.
  11. Job is cleaned and inspected by Quality Control against a checklist and for conformance to tolerances.
  12. Job is packed on skids or crated and prepared for shipping or pickup by customer.
  13. Balance of job cost is due prior to shipping or at time of pickup.

Job Flow For
Custom-Machined Cabinets and Components

  1. Customer files are accepted and a proposal created.
  2. Upon acceptance of the proposal, a 50% deposit is due.
  3. Files are reviewed for accuracy and any necessary programming is completed.
  4. Materials are ordered.
  5. Any custom panels are laid up in the hot press.
  6. Parts are machined on Thermwood CNC Router.
  7. All parts are labeled as they come off the machine.
  8. Edge banding is added as needed.
  9. Job is verified for accuracy.
  10. Job is cleaned and inspected by Quality Control
  11. Job is packed on skids or crated and prepared for shipping or pickup by customer.
  12. Balance of job cost is due prior to shipping or at time of pickup.